5935-01-084-1955, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-084-1953 CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-084-1956 CONNECTOR BODY,PLUG,ELECTRICAL

National Stock Number:
5935-01-084-1955

Federal Supply Class:
5935

National Item Identification Number:
010841955

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

82-4334	74868	AMPHENOL CORPORATION
M39012/02-0029	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-39012/2	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-39012/2	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE W/CABLE CLAMP
BUSHING DIAMETER	0.630 INCHES MAXIMUM
CABLE ENTRANCE DIAMETER	0.438 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD	CRIMP TYPE
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	1000.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND SALT WATER RESISTANT
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
OVERALL HEIGHT	0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
OVERALL LENGTH	1.938 INCHES MAXIMUM
OVERALL WIDTH	0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
MATING END QUANTITY	1
NONDEFINITIVE SPEC/STD DATA	2 CLASS AND C CATEGORY
SHELL TYPE	SOLID
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
UNTHREADED MOUNTING HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING

Click here to Register for Free 30-day Trial