5935-01-065-7488 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-065-7490 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-065-7489

Federal Supply Class:
5935

National Item Identification Number:
010657489

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M39012/19-050181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-39012/1981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-39012/1981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.327 INCHES MINIMUM AND 0.335 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
BUSHING ACCOMMODATION HOLE SHAPEROUND
CABLE ENTRANCE DIAMETER0.186 INCHES NOMINAL
CONNECTOR LOCKING METHODBAYONET PIN
CONNECTOR CABLE STRAIN RELIEF METHODCRIMP TYPE
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLEBNC SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONSHOCK PROOF AND VIBRATION PROOF
INCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG0.0
OVERALL DIAMETER0.432 INCHES MINIMUM AND 0.436 INCHES MAXIMUM
OVERALL LENGTH0.414 INCHES NOMINAL
MATING END QUANTITY1
MOUNTING FACILITY THICKNESS0.188 INCHES MINIMUM AND 0.208 INCHES MAXIMUM
NOMINAL THREAD SIZE0.500 INCHES
POLARIZATION METHODKEY, MULTIPLE KEY GROOVE
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT0.006 GOLD GRAINS, TROY
PRECIOUS MATERIALGOLD
SHELL MATERIALCOPPER ALLOY
SHELL TYPESOLID
SPECIAL FEATURESFURNISHED ITEMS - FERRULE
SPECIFICATION/STANDARD DATA81349-MIL-C-39012/19 GOVERNMENT SPECIFICATION
UNTHREADED MOUNTING HOLE DIAMETER0.493 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP AND SOLDER SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNEF
THREADED DEVICE TYPECOUPLING FACILITY


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us