|
|
|
National Stock Number:
5935-00-976-1453
Federal Supply Class:
5935
National Item Identification Number:
009761453
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 053482-0001 | 71468 | ITT CANNON LLC | | DIC3482 | 71468 | ITT CANNON LLC | | HN-RJP-F-8 | 71468 | ITT CANNON LLC |
|
Techincal Specification:
| CABLE ENTRANCE DIAMETER | 0.405 INCHES MINIMUM AND 0.420 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.906 INCHES NOMINAL | | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.906 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO REAR FACE | 0.750 INCHES NOMINAL | | FLANGE LENGTH | 1.188 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.750 INCHES | | OVERALL LENGTH | 2.656 INCHES NOMINAL | | OVERALL WIDTH | 1.188 INCHES NOMINAL | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD AND BODY SURFACE SILVER | | PRECIOUS MATERIAL | GOLD AND SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY AND 0.100 SILVER GRAINS, TROY | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | SILVER | | SHELL TYPE | SOLID | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNEF | | THREADED DEVICE TYPE | COUPLING FACILITY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.135 INCHES NOMINAL |
|
|