5935-00-975-6984, DUMMY CONNECTOR,RECEPTACLE

National Stock Number:
5935-00-975-6984

Federal Supply Class:
5935

National Item Identification Number:
009756984

Description:
DUMMY CONNECTOR,RECEPTACLE

Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.

Manufacturer Information:

MIL-C-26500	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27297-6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM
CONNECTOR LOCKING METHOD	BAYONET PIN
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM
OVERALL LENGTH	0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM
OVERALL WIDTH	1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM
MATING END QUANTITY	1
OVERALL HEIGHT	1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
SHELL SURFACE TREATMENT	ANODIZE
SHELL TYPE	SOLID
UNTHREADED MOUNTING HOLE DIAMETER	0.116 INCHES MINIMUM AND 0.125 INCHES MAXIMUM

Click here to Register for Free 30-day Trial