|
|
|
National Stock Number:
5935-00-969-7910
Federal Supply Class:
5935
National Item Identification Number:
009697910
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| DDMF50PA150C37 | 71468 | ITT CANNON LLC | | DDMMF50P | 71468 | ITT CANNON LLC |
|
Techincal Specification:
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.406 INCHES NOMINAL | | OVERALL LENGTH | 2.609 INCHES MINIMUM AND 2.656 INCHES MAXIMUM | | OVERALL WIDTH | 0.593 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | OVERALL HEIGHT | 0.675 INCHES MINIMUM AND 0.695 INCHES MAXIMUM | | POLARIZATION METHOD | MATING END | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.050 GOLD GRAINS, TROY AND 0.050 SILVER GRAINS, TROY | | PRECIOUS MATERIAL | GOLD AND SILVER | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | TEST DATA DOCUMENT | 81413-135212 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |
|
|