| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.422 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,COND H FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | N SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,GR A FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| MATING END QUANTITY | 1 |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.105 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | SILVER |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE CIRCLE RADIUS | 0.281 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.625 INCHES AND 0.086 INCHES |
| OVERALL DIAMETER | 0.750 INCHES NOMINAL |
| OVERALL LENGTH | 0.796 INCHES NOMINAL |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER ALLOY 360 |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,GR A FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | SILVER |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | MTG HOLES ARE DRILLED 0.250 INCHES DEEP INTO MTG FLANGE; 7 MTG HOLES |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND AND RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 AND 56 |
| THREAD SERIES DESIGNATOR | UNEF AND UNC |
| THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING HOLE |