|
|
|
National Stock Number:
5935-00-887-6060
Federal Supply Class:
5935
National Item Identification Number:
008876060
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| MS27297-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| OVERALL LENGTH | 0.760 INCHES MINIMUM AND | | 0.800 INCHES MAXIMUM | | OVERALL HEIGHT | 0.932 INCHES MINIMUM AND | | 0.942 INCHES MAXIMUM | | OVERALL WIDTH | 0.932 INCHES MINIMUM AND | | 0.942 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.714 INCHES MINIMUM AND | | 0.724 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.714 INCHES MINIMUM AND | | 0.724 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.708 INCHES MINIMUM AND | | 0.728 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE AND | | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | ANODIZE | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE | | MATING END QUANTITY | 1 | | INSERT MATERIAL | RUBBER SILICONE SINGLE MATING END | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS27297-1 |
|
|