|
|
|
National Stock Number:
5935-00-882-4974
Federal Supply Class:
5935
National Item Identification Number:
008824974
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 111176-001 | 91417 | L3HARRIS TECHNOLOGIES, INC. | | 133-015-21-109 | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | 233-015-21 | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | 375-020-001 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 233-015-21 | 77820 | AMPHENOL CORP | | M21097-7-22 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BOARD ACCOMMODATED WIDTH | 0.054 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | BOARD ACCOMMODATED LENGTH | 2.481 INCHES MINIMUM AND 2.497 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED | | BODY STYLE | STRAIGHT EDGE TYPE | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | 1 ROW OF CONTACTS NON-INSERTED BOARD SINGLE MATING END | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.927 INCHES MINIMUM AND 2.947 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 15 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 3.187 INCHES MINIMUM AND 3.257 INCHES MAXIMUM | | OVERALL WIDTH | 0.332 INCHES MINIMUM AND 0.352 INCHES MAXIMUM | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.015 GOLD GRAINS, TROY | | SHELL MATERIAL | PLASTIC DIALLYL PHTHALATE | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-21097/7 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | SIDE SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | TAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-21097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.131 INCHES NOMINAL |
|
|