5935-00-877-2134, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-877-2134

Federal Supply Class:
5935

National Item Identification Number:
008772134

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

5935008772134	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
A3012768-1	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
SM-B-414840	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
SM-D-454807	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
U-291/U	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-55243	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.735 INCHES NOMINAL
BODY STYLE	STRAIGHT SHAPE THREADED
BUSHING ACCOMMODATION HOLE SHAPE	ROUND
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MAXIMUM CURRENT RATING IN AMPS	7.5 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS	700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	NK-A12 SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	12 SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC SINGLE MATING END
INSERT POSITION IN DEG	0.0
OVERALL DIAMETER	0.800 INCHES NOMINAL
OVERALL LENGTH	1.063 INCHES NOMINAL
MATING END QUANTITY	1
MOUNTING FACILITY THICKNESS	0.172 INCHES NOMINAL
NOMINAL THREAD SIZE	0.875 INCHES
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
PRECIOUS MATERIAL AND WEIGHT	0.012 GOLD GRAINS, TROY AND 0.012 SILVER GRAINS, TROY
PRECIOUS MATERIAL	GOLD AND SILVER
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	STEEL COMP 303
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	81349-MIL-C-55243 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-55243 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNEF
THREADED DEVICE TYPE	MOUNTING BUSHING

Click here to Register for Free 30-day Trial