| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE W/CABLE CLAMP |
| BUSHING DIAMETER | 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| CABLE ENTRANCE DIAMETER | 0.115 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.343 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED SHELL |
| CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.343 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| OVERALL HEIGHT | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| OVERALL LENGTH | 0.784 INCHES MINIMUM AND 0.816 INCHES MAXIMUM |
| OVERALL WIDTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD AND SHELL SURFACE SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY AND 0.100 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL SURFACE TREATMENT | SILVER |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.090 INCHES NOMINAL |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | COUPLING FACILITY |