|
|
|
National Stock Number:
5935-00-773-1735
Federal Supply Class:
5935
National Item Identification Number:
007731735
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 370-2203-00 | 95104 | ALCATEL-LUCENT HOLDINGS INC. | | 370-2203-000 | 95104 | ALCATEL-LUCENT HOLDINGS INC. | | DPX2M16C3S40S33A0073 | 71468 | ITT CANNON LLC |
|
Techincal Specification:
| TERMINAL LOCATION | BACK ALL MATING ENDS ALL CONTACT GROUPINGS | | TERMINAL TYPE | SOLDER WELL ALL MATING ENDS ALL CONTACT GROUPINGS | | MATING END QUANTITY | 2 | | OVERALL LENGTH | 1.392 INCHES MINIMUM AND | | 1.452 INCHES MAXIMUM | | OVERALL HEIGHT | 3.095 INCHES MINIMUM AND | | 3.125 INCHES MAXIMUM | | OVERALL WIDTH | 1.985 INCHES MINIMUM AND | | 2.015 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.783 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.437 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.531 INCHES NOMINAL | | SHELL TYPE | SPLIT | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | INSERT MATERIAL | PLASTIC MELAMINE ALL MATING ENDS | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TY MME MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS | | CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 10.0 1ST MATING END 2ND CONTACT GROUPING | | 5.0 2ND MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 ALL MATING ENDS ALL CONTACT GROUPINGS | | CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS | | CONTACT SURFACE TREATMENT | GOLD AND | | SILVER ALL MATING ENDS ALL CONTACT GROUPINGS | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | SALT WATER RESISTANT AND | | VIBRATION RESISTANT | | PRECIOUS MATERIAL | GOLD AND | | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.068 GOLD GRAINS, TROY AND | | 0.068 SILVER GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND | | CONTACT SURFACES SILVER | | SPECIAL FEATURES | POLARIZING KEY 1-5-1 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 71468 | | DESIGN CONTROL REFERENCE | DPX2M16C3S40S33A0073 |
|
|