|
|
|
National Stock Number:
5935-00-617-5725
Federal Supply Class:
5935
National Item Identification Number:
006175725
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 10-87324-20PW | 77820 | AMPHENOL CORP | | 9073224 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| CONTACT POSITION ARRANGEMENT STYLE | 24-20 SINGLE MATING END | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS | | INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END 1ST CONTACT GROUPING | | 9 SINGLE MATING END 2ND CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.531 INCHES NOMINAL | | OVERALL DIAMETER | 1.990 INCHES MINIMUM AND | | 2.010 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.906 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 1.209 INCHES MINIMUM AND | | 1.219 INCHES MAXIMUM | | MOUNTING FACILITY THICKNESS | 0.298 INCHES MAXIMUM | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND | | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING NUT | | THREADED DEVICE TYPE | COUPLING FACILITY AND | | MOUNTING BUSHING | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.500 INCHES | | THREAD CLASS | 2A | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM AND | | CHROMATE | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 80.0 | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 23.0 SINGLE MATING END 1ST CONTACT GROUPING | | 13.0 SINGLE MATING END 2ND CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 1250.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END ALL CONTACT GROUPINGS | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | SALT WATER RESISTANT AND | | VIBRATION RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD | | SPECIAL FEATURES | FURNISHED ITEMS - PIPE PLUG |
|
|