5935-00-552-6810, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-552-6814 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-552-6810

Federal Supply Class:
5935

National Item Identification Number:
005526810

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

1PC90375	74868	AMPHENOL CORPORATION
82-314	74868	AMPHENOL CORPORATION
90375	74868	AMPHENOL CORPORATION
IPC90375	74868	AMPHENOL CORPORATION
UG1187AU	80058	JOINT ELECTRONICS TYPE DESIGNATION SYSTEM
REB49037	80064	NAVAL SHIP SYSTEMS COMMAND
UG1187U	80058	JOINT ELECTRONICS TYPE DESIGNATION SYSTEM

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.531 INCHES NOMINAL
BODY STYLE	STRAIGHT SHAPE W/CABLE CLAMP
BUSHING DIAMETER	0.625 INCHES NOMINAL
CABLE ENTRANCE DIAMETER	0.444 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.718 INCHES NOMINAL
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
CONNECTOR CABLE STRAIN RELIEF METHOD	COMPRESSION NUT
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	N SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TYPE II,CLASS 2 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.718 INCHES NOMINAL
INCLUDED CONTACT TYPE	COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC SINGLE MATING END
OVERALL HEIGHT	1.000 INCHES NOMINAL
OVERALL LENGTH	1.563 INCHES NOMINAL
OVERALL WIDTH	1.000 INCHES NOMINAL
MATING END QUANTITY	1
NOMINAL THREAD SIZE	0.625 INCHES
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND SHELL SURFACE SILVER
PRECIOUS MATERIAL AND WEIGHT	0.005 GOLD GRAINS, TROY AND 0.105 SILVER GRAINS, TROY
PRECIOUS MATERIAL	GOLD AND SILVER
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL	COPPER ALLOY
SHELL SURFACE TREATMENT	SILVER
SHELL TYPE	SOLID
UNTHREADED MOUNTING HOLE DIAMETER	0.125 INCHES NOMINAL
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNEF
THREADED DEVICE TYPE	COUPLING FACILITY

Click here to Register for Free 30-day Trial