|
|
|
National Stock Number:
5935-00-456-9198
Federal Supply Class:
5935
National Item Identification Number:
004569198
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 4144500-024 | 05869 | RAYTHEON COMPANY | | M28748/10A0V01A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M28748/10A0VO1A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M28748/10AV0V1A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748/10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC28748-10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18156-2V | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE W/JACKSCREW | | CONNECTOR LOCKING METHOD | SCREW | | CONTACT POSITION ARRANGEMENT STYLE | 10 SINGLE MATING END | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.293 INCHES MINIMUM AND 1.305 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND VIBRATION RESISTANT AND SALT WATER RESISTANT | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | OVERALL HEIGHT | 1.420 INCHES MAXIMUM | | OVERALL LENGTH | 1.665 INCHES MINIMUM AND 1.685 INCHES MAXIMUM | | OVERALL WIDTH | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.138 INCHES | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.010 GOLD GRAINS, TROY | | PRECIOUS MATERIAL | GOLD | | UNTHREADED MOUNTING HOLE DIAMETER | 0.149 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|