5935-00-444-0491, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-444-0490 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-444-0491

Federal Supply Class:
5935

National Item Identification Number:
004440491

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

M28748/09G0AL1A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M28748/9G0AL1A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-28748/9	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC28748-9	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY STYLE	STRAIGHT SHAPE, RECTANGULAR
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM
CONNECTOR LOCKING METHOD	JACKSCREW-SOCKET
CONTACT MAXIMUM CURRENT RATING IN AMPS	13.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	158 SINGLE MATING END
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM
INCLUDED CONTACT QUANTITY	158 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-M-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
OVERALL LENGTH	1.740 INCHES NOMINAL
OVERALL WIDTH	2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM
MATING END QUANTITY	1
NOMINAL THREAD LENGTH	0.560 INCHES
NOMINAL THREAD SIZE	0.250 INCHES
OVERALL HEIGHT	1.850 INCHES MINIMUM AND 1.870 INCHES MAXIMUM
POLARIZATION METHOD	POLARIZATION BOSS
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACE GOLD
PRECIOUS MATERIAL AND WEIGHT	0.158 GOLD GRAINS, TROY
PRECIOUS MATERIAL	GOLD
SPECIFICATION/STANDARD DATA	81349-MIL-C-28748/9 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	28
THREADED DEVICE TYPE	COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER	0.149 INCHES NOMINAL

Click here to Register for Free 30-day Trial