5935-00-415-3838, CONNECTOR,RECEPTACLE,ELECTRICAL

6150-00-415-3821 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5935-00-415-3838

Federal Supply Class:
5935

National Item Identification Number:
004153838

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

KM-79-06	91836	WINCHESTER INTERCONNECT CORPORATION
RF02560A	94375	LAX ELECTRONICS, INC.
SMB502969	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
TRU-5691	92180	WINCHESTER INTERCONNECT RF CORPORATION

Techincal Specification:

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.219 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO REAR FACE	0.281 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	0.219 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	NONSTD SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	SILVER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
FLANGE LENGTH	0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM
INSERT MATERIAL	PLASTIC POLYAMIDE SINGLE MATING END
MATING END QUANTITY	1
III BODY STYLE	ANGLE SHAPE, EXTERNAL COUPLING
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES AND SHELL SURFACES SILVER
PRECIOUS MATERIAL AND WEIGHT	0.105 SILVER GRAINS, TROY
PRECIOUS MATERIAL	SILVER
PROPRIETARY CHARACTERISTICS	PACS
NOMINAL THREAD SIZE	0.086 INCHES
OVERALL HEIGHT	0.844 INCHES NOMINAL
OVERALL LENGTH	0.531 INCHES NOMINAL
OVERALL WIDTH	0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL	COPPER ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE
SHELL SURFACE TREATMENT	SILVER
SHELL TYPE	SOLID
TERMINAL LOCATION	SIDE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	PIN SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS	2B
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	56
THREAD SERIES DESIGNATOR	UNC
THREADED DEVICE TYPE	MOUNTING HOLE
UNTHREADED MOUNTING HOLE DIAMETER	0.086 INCHES NOMINAL

Click here to Register for Free 30-day Trial