5935-00-412-3918, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-412-3919 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-412-3918

Federal Supply Class:
5935

National Item Identification Number:
004123918

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

MIL-DTL-26500	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC26500	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS24265R12B12S6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.761 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING W/STRAIN RELIEF
BUSHING ACCOMMODATION HOLE SHAPE	ROUND W/FLAT
CABLE ENTRANCE DIAMETER	0.312 INCHES MINIMUM
CONNECTOR LOCKING METHOD	BAYONET PIN
CONNECTOR CABLE STRAIN RELIEF METHOD	CABLE CLAMP
CONTACT MAXIMUM CURRENT RATING IN AMPS	7.5 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	22-12 SINGLE MATING END
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	1500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	12 SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG	265.0
OVERALL DIAMETER	1.291 INCHES NOMINAL
OVERALL LENGTH	1.625 INCHES MINIMUM AND 2.140 INCHES MAXIMUM
MATING END QUANTITY	1
MOUNTING FACILITY THICKNESS	0.079 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.938 INCHES
NOMINAL THREAD LENGTH	0.300 INCHES
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACE GOLD
PRECIOUS MATERIAL AND WEIGHT	0.012 GOLD GRAINS, TROY
PRECIOUS MATERIAL	GOLD
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	CADMIUM
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	81349-MIL-C-26500 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-26500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNEF
THREADED DEVICE TYPE	MOUNTING BUSHING

Click here to Register for Free 30-day Trial