5935-00-410-1606, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-410-1606

Federal Supply Class:
5935

National Item Identification Number:
004101606

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

LJT00T-11-4P(001)	77820	AMPHENOL CORP
MIL-C-27599	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-27599	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS20026T11A4P	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.812 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	10-4 SINGLE MATING END
CONTACT SURFACE TREATMENT	GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.812 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.627 INCHES MINIMUM AND 0.632 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY	4 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG	0.0
MATING END QUANTITY	1
NOMINAL THREAD LENGTH	0.250 INCHES
NOMINAL THREAD SIZE	0.562 INCHES
OVERALL HEIGHT	1.011 INCHES MINIMUM AND 1.051 INCHES MAXIMUM
OVERALL LENGTH	1.094 INCHES MAXIMUM
OVERALL WIDTH	1.011 INCHES MINIMUM AND 1.051 INCHES MAXIMUM
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
PRECIOUS MATERIAL	GOLD AND SILVER
PRECIOUS MATERIAL AND WEIGHT	0.020 GOLD GRAINS, TROY AND 0.020 SILVER GRAINS, TROY
SHELL MATERIAL	ALUMINUM
SHELL SURFACE TREATMENT	CADMIUM
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	96906-MS20026 GOVERNMENT STANDARD
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-27599 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNEF
THREADED DEVICE TYPE	BACK SHELL
UNTHREADED MOUNTING HOLE DIAMETER	0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM

Click here to Register for Free 30-day Trial