|
|
|
National Stock Number:
5935-00-259-9848
Federal Supply Class:
5935
National Item Identification Number:
002599848
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 25BNC-50-3-3 | C1375 | HUBER + SUHNER GMBH | | 25BNC50-3-3 | S3107 | SUHNER OTTO AG | | UG291AU | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | UG291AU | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3608 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 25BNC50-3-3 | S3708 | HUBER AND SUHNER LTD |
|
Techincal Specification:
| CABLE ENTRANCE DIAMETER | 0.219 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.500 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET LATCH | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP AND CORD PROTECTOR | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.500 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | WATERPROOF | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL PIN ALL MATING ENDS ALL CONTACT GROUPINGS | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | OVERALL HEIGHT | 0.688 INCHES NOMINAL | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | OVERALL WIDTH | 0.688 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 3.000 INCHES | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | ALUMINUM ALLOY | | SPECIAL FEATURES | POLARIZED,WITH MTG HOLES | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 56 | | THREADED DEVICE TYPE | MOUNTING HOLE |
|
|