|
|
|
National Stock Number:
5935-00-256-0703
Federal Supply Class:
5935
National Item Identification Number:
002560703
Description:
INSERT,ELECTRICAL CONNECTOR
Detail:
An insulating element with or without contact(s) designed to fit into an ADAPTER (2), CONNECTOR; CONNECTOR BODY, PLUG, ELECTRICAL; CONNECTOR BODY, RECEPTACLE, ELECTRICAL; CONNECTOR, PLUG, ELECTRICAL; or CONNECTOR, RECEPTACLE, ELECTRICAL forming an integral liner or seat. Excludes INSULATOR (1), DISK; INSULATOR (1) PLATE; TERMINAL (1), FEEDTHRU and TERMINAL BOARD. See also CONNECTOR (as modified); CONNECTOR BODY (as modified); and INSERT MODULE, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M28748/3-E0002A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M28748/3E0002A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS14008-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATING END QUANTITY | 1 | | CONTACT POSITION ARRANGEMENT STYLE | 26 SINGLE MATING END | | OVERALL LENGTH | 1.620 INCHES MINIMUM AND | | 1.630 INCHES MAXIMUM | | OVERALL HEIGHT | 0.506 INCHES MINIMUM AND | | 0.516 INCHES MAXIMUM | | OVERALL WIDTH | 0.557 INCHES MINIMUM AND | | 0.567 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.307 INCHES MINIMUM AND | | 1.317 INCHES MAXIMUM | | POLARIZATION METHOD | MATING END | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE AND | | MIL-M-19833,TYPE GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-DTL-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-28748 GOVERNMENT SPECIFICATION | | SPECIAL FEATURES | TWO 0.143 IN. SQUARE MTG HOLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-28748/3 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M28748/3-E0002A |
|
|