|
|
|
National Stock Number:
5935-00-250-5833
Federal Supply Class:
5935
National Item Identification Number:
002505833
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 348-292-18000-01 | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | 348-292-18000-01 | 13556 | LABINAL COMPONENTS AND SYSTEMS INC CINCH MILITARY AEROSPACE DIV | | 348-292-18000-1 | 77820 | AMPHENOL CORP | | M81511/30-18-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-81511-30 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM | | OVERALL LENGTH | 0.700 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | OVERALL WIDTH | 1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL SURFACE TREATMENT | NICKEL AND CHROMIUM | | SHELL TYPE | SOLID | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | SHELL MATERIAL | ALUMINUM ALLOY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81511-30 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|