|
|
|
National Stock Number:
5935-00-241-1945
Federal Supply Class:
5935
National Item Identification Number:
002411945
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 251-79 | H0203 | THALES NEDERLAND B.V. | | 352250023471 | H0203 | THALES NEDERLAND B.V. | | 82-96 | 74868 | AMPHENOL CORPORATION | | UG21C | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | MILC71 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | JANC71 | 81350 | JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | UG21CU | 81350 | JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | UG21CU | 81352 | AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP |
|
Techincal Specification:
| CABLE ENTRANCE DIAMETER | 0.437 INCHES NOMINAL | | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 355.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | OVERALL DIAMETER | 0.781 INCHES NOMINAL | | OVERALL LENGTH | 1.750 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.625 INCHES | | NOMINAL THREAD LENGTH | 0.625 INCHES | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | ANODIZE | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | THREAD SERIES DESIGNATOR | UNEF | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|