| BODY DIAMETER | 0.640 INCHES MAXIMUM |
| BODY HEIGHT | 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | ACTUATION POINT NOT ADJUSTABLE AND DEACTUATION POINT NOT ADJUSTABLE |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD AND 500.0 MILLIAMPERES LAMP LOAD FIRST VOLTAGE |
| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD AND 2.5 AMPERES INDUCTIVE LOAD AND 1.0 AMPERES LAMP LOAD SECOND VOLTAGE |
| CONTACT STIMULUS RATING | 320.00 ACTUATION POINT NOMINAL DEGREES FAHRENHEIT AND 100.00 DEACTUATION POINT NOMINAL DEGREES FAHRENHEIT |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL FIRST VOLTAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SECOND VOLTAGE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.937 INCHES NOMINAL |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| FREQUENCY IN HERTZ | 60.0 FIRST VOLTAGE |
| OPERATING TEMP RATING | -100.0 FAHRENHEIT MINIMUM AND 125.0 FAHRENHEIT MAXIMUM |
| OVERALL HEIGHT | 0.523 INCHES MINIMUM AND 0.638 INCHES MAXIMUM |
| OVERALL LENGTH | 1.160 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| MEDIA FOR WHICH DESIGNED | GAS |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING SLOT WIDTH | 0.140 INCHES NOMINAL |
| MOUNTING METHOD | BRACKET(S) AND SLOT AND UNTHREADED HOLE(S) |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES NOMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-24236/1 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | DISC W/FLANGE |
| TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-24236 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |