|
|
|
National Stock Number:
5930-01-426-1182
Federal Supply Class:
5930
National Item Identification Number:
014261182
Description:
SWITCH,PUSH
Detail:
A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. The actuating device may or may not be an integral part of the switch. The item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes LIGHT-SWITCH; LIGHT-SWITCH ASSEMBLY; SWITCH, BEAM SELECTING, HEADLIGHT; SWITCH, FOOT; SWITCH, INTERLOCK; SWITCH, PRESSURE; SWITCH, PUSH-PULL; SWITCH, SENSITIVE and SWITCH ASSEMBLY. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see STARTER, MOTOR and CONTROLLER, MOTOR.
|
Manufacturer Information:
| M8805/110-5369 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-8805/110 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-8805/110 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY DIAMETER | 0.437 INCHES NOMINAL | | BODY LENGTH | 0.775 INCHES NOMINAL | | BODY STYLE | BUSHING MOUNTED | | BUSHING LENGTH | 0.250 INCHES NOMINAL | | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 4.000 AMPERES RESISTIVE DC AND 2.000 AMPERES INDUCTIVE DC | | INCLOSURE TYPE | FULLY INCLOSED | | MAXIMUM VOLTAGE RATING IN VOLTS | 28.0 DC | | MOUNTING METHOD | THREADED BUSHING | | NOMINAL THREAD SIZE | 0.469 INCHES | | NONPILE-UP CONTACT ARRANGEMENT | 1 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY SINGLE SWITCH UNIT | | SPECIFICATION/STANDARD DATA | 81349-MIL-S/110 GOVERNMENT SPECIFICATION | | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81349-MIL-S-8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNS |
|
|