5930-01-371-8106, SWITCH,CODE INDICATING WHEEL

5930-01-371-8105 SWITCH,CODE INDICATING WHEEL

5930-01-371-8107 SWITCH,CODE INDICATING WHEEL

National Stock Number:
5930-01-371-8106

Federal Supply Class:
5930

National Item Identification Number:
013718106

Description:
SWITCH,CODE INDICATING WHEEL

Detail:
A SWITCH WHICH IS EXTERNALLY ACTUATED BY A THUMBWHEEL AND/OR PUSHBUTTON. A LEGEND OR MESSAGE IS VISUALLY DISPLAYED AT EACH POSITION OF THE INDICATING WHEEL WHICH CORRESPONDS TO ELECTRICALLY CODED OUTPUT. ELECTRICALLY CODED OUTPUT IS ACHIEVED BY ROTATING A SET OF BRUSH CONTACTS PERMANENTLY ATTACHED TO THE CODE INDICATING WHEEL, AGAINST A STATIONARY COMMUTATOR WHICH IS USUALLY A PRINTED WIRING BOARD HAVING ELECTRICAL PADS OR CONTACTS WHICH ARE INTERCONNECTED BY THE ROTATING BRUSH CONTACTS. MAY HAVE ADDITIONAL ELECTRICAL COMPONENTS (SUCH AS RESISTORS, CAPACITORS, DIODES) PREMOUNTED ON THAT PORTION OF PRINTED WIRING BOARD WHICH EXTENDS BEYOND THE BACK OF SWITCH HOUSING.

Manufacturer Information:

2A7102MLQU	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
2A7102MLQU	97525	TRANSICO, INC.
M22710/15-522	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-22710/15	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-S-22710/15	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ACTUATOR TYPE	THUMBWHEEL ALL ACTUATORS
COLOR	BLACK EACH BODY
COLOR	BLACK EACH INDICATOR BACKGROUND
COLOR	WHITE EACH INDICATOR MARKING
COLOR	RED EACH LAMP
CONTACT ARRANGEMENT TRUTH TABLE	SPECIAL EACH SECTION
CONTACT LOAD CURRENT RATING	125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT VOLTAGE RATING IN VOLTS	28.0 DC AT SEA LEVEL
INDIVIDUAL SECTION QUANTITY	2
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	1.590 INCHES NOMINAL SINGLE MOUNTING FACILITY
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS	0.900 INCHES NOMINAL SINGLE MOUNTING FACILITY
OVERALL HEIGHT	1.780 INCHES NOMINAL
OVERALL LENGTH	1.760 INCHES NOMINAL
OVERALL WIDTH	1.150 INCHES NOMINAL
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY
MOUNTING METHOD	BRACKET(S) AND UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
SPECIAL FEATURES	APPLICATION: TS-3543/U DDT
READOUT INDICATOR MARKING	0,1,2,3,4,5,6,7 EACH SECTION
SPECIAL TRUTH TABLE IDENTIFICATION	81349-BCD 2POLE 8 POSITION EACH SECTION
SPECIFICATION/STANDARD DATA	81349-MIL-S-22710/15 GOVERNMENT SPECIFICATION
UNTHREADED MOUNTING HOLE DIAMETER	0.100 INCHES NOMINAL SINGLE MOUNTING FACILITY
STYLE DESIGNATOR	RECTANGULAR INLINE INDICATING
SWITCH ACTUATOR INDEXING POSITION QUANTITY	8 SINGLE ACTUATOR
TERMINAL TYPE	PRINTED CIRCUIT
TEST DATA DOCUMENT	81349-MIL-S-22710 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial