|
|
|
National Stock Number:
5930-01-247-5944
Federal Supply Class:
5930
National Item Identification Number:
012475944
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 10138097 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | M5423/07-09 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-5423/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS5423/07-09 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DOME HEIGHT | 0.281 INCHES MINIMUM | | BASE THREAD LOCATION | INTERNAL | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DRIPTIGHT-NEMA TYPE 2 | | OVERALL HEIGHT | 0.609 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE BODY | | MOUNTING DEVICE QUANTITY | 1 | | MOUNTING METHOD | THREADED HOLE(S) | | NOMINAL THREAD SIZE | 0.625 INCHES | | OPENING INSIDE DIAMETER | 0.516 INCHES NOMINAL | | SPECIAL FEATURES | RFI SHIELDED | | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-B-5423/7 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | CLOSED END | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 32 |
|
|