| CONTACT LOAD CURRENT RATING | 0.25 AMPERES RESISTIVE LOAD AND 0.02 AMPERES RESISTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 0.25 AMPERES RESISTIVE LOAD AND 0.05 AMPERES INDUCTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 0.25 AMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 6.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.190 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.090 INCHES NOMINAL SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OVERALL LENGTH | 2.152 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.260 INCHES NOMINAL AT 3:00 OCLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS |
| OVERALL DIAMETER | 0.720 INCHES NOMINAL |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS AND CONTACT SURFACES GOLD AND TERMINALS AND CONTACT SURFACES SILVER |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 15.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.502 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 7 SINGLE ACTUATOR |
| SWITCH ACTUATOR MOMENTARY POSITION | CLOCKWISE ALL ACTUATORS |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 7 EACH SECTION REAR |