| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +8.000 TO 115.000 INCH-OUNCES SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.094 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.219 INCHES NOMINAL FIRST ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 3 |
| OVERALL LENGTH | 3.249 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| OVERALL DIAMETER | 1.170 INCHES NOMINAL |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER |
| PRECIOUS MATERIAL | SILVER |
| ROTOR THROUGH CONNECTION QUANTITY | 2 EACH SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 195.0 DEGREES FROM NONTURN DEVICE ALL ACTUATORS |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.437 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.437 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED FIRST ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SECOND ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 FIRST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES FIRST ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP FIRST ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 EACH SECTION REAR |