| CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.093 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.220 INCHES NOMINAL FIRST ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OVERALL DIAMETER | 1.150 INCHES NOMINAL |
| OVERALL LENGTH | 3.220 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 OCLOCK |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 202.0 DEGREES FROM NONTURN DEVICE FIRST ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 195.0 DEGREES FROM NONTURN DEVICE SECOND ACTUATOR |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.370 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.740 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SECOND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED FIRST ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SECOND ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 FIRST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SECOND ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES FIRST ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.430 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 10 SECOND SECTION REAR |
| THROW QUANTITY | 2 FIRST SECTION REAR |