| CONTACT LOAD CURRENT RATING | 10.0 AMPERES INDUCTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 10.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 120.0 DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +0.500 TO 4.000 INCH-POUNDS SINGLE ACTUATOR |
| FEATURES PROVIDED | ACTUATOR KNOB |
| FIRST FLAT LENGTH | 0.750 INCHES NOMINAL SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 5 |
| KNOB MANUFACTURER PART NUMBER | A |
| KNOB MANUFACTURER CODE | 82121 |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.641 INCHES NOMINAL FIRST MOUNTING FACILITY |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.094 INCHES NOMINAL SECOND MOUNTING FACILITY |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 1.641 INCHES NOMINAL FIRST MOUNTING FACILITY |
| OVERALL HEIGHT | 2.500 INCHES MAXIMUM |
| OVERALL LENGTH | 4.531 INCHES NOMINAL |
| OVERALL WIDTH | 2.406 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY |
| MOUNTING METHOD | BRACKET(S) AND THREADED HOLE(S) SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.190 INCHES SINGLE MOUNTING FACILITY |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 1.000 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED SINGLE ACTUATOR |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.203 INCHES NOMINAL SECOND MOUNTING FACILITY |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| SWITCH ACTUATOR MOMENTARY POSITION | CLOCKWISE SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB W/SCREW |
| THREAD CLASS | 2B SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 24 SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 EACH SECTION REAR |