| CONTACT LOAD CURRENT RATING | 250.0 MILLIAMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 300.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES FOURTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EIGHTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES FIFTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SIXTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES TENTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES NINTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SECOND SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SEVENTH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES THIRD SECTION FRONT |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.216 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 10 |
| OVERALL LENGTH | 5.750 INCHES NOMINAL |
| OVERALL WIDTH | 1.609 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 OCLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| OVERALL HEIGHT | 1.875 INCHES NOMINAL |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 0.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.940 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 19 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 18.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.374 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 19 EACH SECTION FRONT |