| CONTACT LOAD CURRENT RATING | 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.094 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.219 INCHES NOMINAL FIRST ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 4 |
| OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
| OVERALL DIAMETER | 1.185 INCHES MAXIMUM |
| OVERALL LENGTH | 3.950 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| NONTURN DEVICE RADIUS | 0.375 INCHES NOMINAL AT 3:00 OCLOCK |
| POLE QUANTITY | 1 FOURTH SECTION FRONT |
| POLE QUANTITY | 1 THIRD SECTION FRONT |
| POLE QUANTITY | 1 SECOND SECTION FRONT |
| POLE QUANTITY | 2 FIRST SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 2 FIRST SECTION |
| ROTOR THROUGH CONNECTION QUANTITY | 1 FOURTH SECTION |
| ROTOR THROUGH CONNECTION QUANTITY | 1 SECOND SECTION |
| ROTOR THROUGH CONNECTION QUANTITY | 1 THIRD SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 FIRST ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 SECOND ACTUATOR |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 1.250 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SECOND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED FIRST ACTUATOR |
| SHAFT LENGTH | 0.750 INCHES NOMINAL FIRST ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 FIRST ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 7 SECOND ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES FIRST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SECOND ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 4 FIRST SECTION REAR |
| THROW QUANTITY | 7 THIRD SECTION REAR |
| THROW QUANTITY | 7 FOURTH SECTION REAR |
| THROW QUANTITY | 7 SECOND SECTION REAR |