| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.156 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 6 |
| POLE QUANTITY | 1 FIFTH SECTION REAR |
| POLE QUANTITY | 1 SIXTH SECTION REAR |
| POLE QUANTITY | 2 FOURTH SECTION FRONT |
| POLE QUANTITY | 2 FIFTH SECTION FRONT |
| POLE QUANTITY | 2 FOURTH SECTION REAR |
| POLE QUANTITY | 2 SIXTH SECTION FRONT |
| POLE QUANTITY | 3 FIRST SECTION FRONT |
| POLE QUANTITY | 3 FIRST SECTION REAR |
| POLE QUANTITY | 3 SECOND SECTION FRONT |
| POLE QUANTITY | 3 SECOND SECTION REAR |
| POLE QUANTITY | 3 THIRD SECTION REAR |
| POLE QUANTITY | 4 THIRD SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS AND CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 OCLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -40.0 TO 131.0 FAHRENHEIT |
| OVERALL HEIGHT | 1.312 INCHES NOMINAL |
| OVERALL LENGTH | 3.438 INCHES MINIMUM AND 3.562 INCHES MAXIMUM |
| OVERALL WIDTH | 1.250 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, SLOTTED, PARALLEL FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.469 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 1 FOURTH SECTION FRONT |
| THROW QUANTITY | 1 SIXTH SECTION FRONT |
| THROW QUANTITY | 2 FIFTH SECTION FRONT |
| THROW QUANTITY | 3 FIRST SECTION FRONT |
| THROW QUANTITY | 3 FIRST SECTION REAR |
| THROW QUANTITY | 3 SECOND SECTION REAR |
| THROW QUANTITY | 3 SECOND SECTION FRONT |
| THROW QUANTITY | 3 THIRD SECTION FRONT |
| THROW QUANTITY | 3 THIRD SECTION REAR |
| THROW QUANTITY | 4 FIFTH SECTION REAR |
| THROW QUANTITY | 4 FOURTH SECTION REAR |
| THROW QUANTITY | 6 SIXTH SECTION REAR |
| WIDTH BETWEEN FLATS | 0.187 INCHES NOMINAL SINGLE ACTUATOR |