| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SECOND ACTUATOR |
| FIRST FLAT LENGTH | 0.312 INCHES NOMINAL FIRST ACTUATOR |
| FLAT HEIGHT | 0.119 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.216 INCHES NOMINAL FIRST ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 2 |
| POLE QUANTITY | 1 EACH SECTION REAR |
| MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.530 INCHES NOMINAL AT 12:00 OCLOCK |
| NONTURN DEVICE TYPE | TAB AT 12:00 OCLOCK |
| OPERATING TEMP RANGE | -5.0 TO 75.0 CELSIUS |
| OVERALL DIAMETER | 1.560 INCHES NOMINAL |
| OVERALL LENGTH | 2.902 INCHES NOMINAL |
| SHAFT DIAMETER | 0.150 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.750 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 1.090 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 105.0 DEGREES FROM NONTURN DEVICE SECOND ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 270.0 DEGREES FROM NONTURN DEVICE FIRST ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SECOND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED FIRST ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SECOND ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 13 FIRST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 25.7 DEGREES FIRST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 25.7 DEGREES SECOND ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 10 SECOND SECTION REAR |
| THROW QUANTITY | 13 FIRST SECTION REAR |