5925-01-256-1833, CIRCUIT BREAKER

National Stock Number:
5925-01-256-1833

Federal Supply Class:
5925

National Item Identification Number:
012561833

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

M39019/01-263	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-39019/1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-39019/1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
BODY LENGTH	1.531 INCHES MINIMUM AND 1.531 INCHES MINIMUM AND 1.562 INCHES MAXIMUM1.562 INCHES MAXIMUM
BODY STYLE	SINGLE POLE TYPESINGLE POLE TYPE
BODY WIDTH	0.594 INCHES MINIMUM AND 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM0.625 INCHES MAXIMUM
BUSHING LENGTH	0.332 INCHES MINIMUM AND 0.332 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.875 INCHES MINIMUM AND 0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM0.906 INCHES MAXIMUM
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
CRITICALITY CODE JUSTIFICATION	FEAT
FREQUENCY IN HERTZ	400.0 SINGLE LOCATION
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	HERMETICALLY SEALED
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	1.5 AMPERES AC AND 1.5 AMPERES DC SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	300.0 AC AND 500.0 DC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING WITH PANEL SEAL1 THREADED BUSHING WITH PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.669 INCHES MINIMUM AND 1.669 INCHES MINIMUM AND 1.700 INCHES MAXIMUM1.700 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.375 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC AND 50.0 DC SINGLE LOCATION
POLE QUANTITY	11
RESET METHOD	MANUAL
SPECIAL FEATURES	WEAPONS SYSTEM CRITICAL ITEM
SPECIFICATION/STANDARD DATA	81349-MIL-C-39019/1 GOVERNMENT SPECIFICATION
STORAGE TYPE	GENERAL PURPOSE WAREHOUSEGENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY	2 WIRE HOOK
TEST DATA DOCUMENT	81349-MIL-C-39019 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD QUANTITY PER INCH	3232
THREAD SERIES DESIGNATOR	UNEF
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.055 MINIMUM AT 200 PCT AND 0.950 MAXIMUM AT 200 PCT SINGLE LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
TRIP RELEASE METHOD	MAGNETIC SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	150.0 SINGLE LOCATION

Click here to Register for Free 30-day Trial