5925-01-166-9675, CIRCUIT BREAKER

National Stock Number:
5925-01-166-9675

Federal Supply Class:
5925

National Item Identification Number:
011669675

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

GJ3-Z12-1	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
SM-A-973939-13	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
BODY HEIGHT	2.958 INCHES MINIMUM AND 2.978 INCHES MAXIMUM
BODY LENGTH	7.115 INCHES MINIMUM AND 7.135 INCHES MAXIMUM
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
BODY WIDTH	4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
BOSS HEIGHT	0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	2.797 INCHES MINIMUM AND 2.827 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	1.500 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	4.638 INCHES MINIMUM AND 4.668 INCHES MAXIMUM
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, AND THREE LINKED
FRAGILITY FACTOR	MODERATELY RUGGED
FREQUENCY IN HERTZ	47.0 OR 63.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SECOND LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP THIRD LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP W/DUAL RATING FIRST LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	3 TOGGLE
MATERIAL	PLASTIC CASE
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC ALL LOCATIONS
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	150.0 AMPERES AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED HOLE(S) AND 6 UNTHREADED HOLE(S)
NOMINAL THREAD SIZE	0.190 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC AND 90.0 AC FIRST LOCATION
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC SECOND LOCATION
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC THIRD LOCATION
POLE QUANTITY	3
RESET METHOD	MANUAL
SPECIAL HANDLING FEATURE	MAGNETIC
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY	6 THREADED STUD
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	15.000 MINIMUM AT 200 PCT AND 95.000 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS
UNTHREADED MOUNTING HOLE DIAMETER	0.031 INCHES NOMINAL

Click here to Register for Free 30-day Trial