|
|
|
National Stock Number:
5925-00-267-1447
Federal Supply Class:
5925
National Item Identification Number:
002671447
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 006-10010 | 74193 | EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV | | 22290-3 | 10412 | WHITTAKER CORP WHITTAKER ELECTRONIC SYSTEMS DIV | | 260-4034-040 | 13499 | ROCKWELL COLLINS, INC. | | 6005-114-1 | 28262 | QUALITY TRANSFORMER CORP | | 342C698H01 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 342C698H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | M5423/14-06 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-5423/14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 6005-114-1 | 82116 | ELECTRIC REGULATOR CORP | | HE102 | 97539 | APM HEXSEAL CORP | | HE1020 | 97539 | APM HEXSEAL CORP | | HE1020ASSY | 97539 | APM HEXSEAL CORP | | M5423/14-06 | 97539 | APM HEXSEAL CORP | | IN-36748 | U02X6 | EADS ASTRIUM PARADIGM SERVICES LTD | | SC5330-004-1 | 12115 | DRS ICAS, LLC | | SMB632698 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | MIL-B-5423/14A-0 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BASE OVERALL LENGTH | 1.875 INCHES NOMINAL | | BASE WIDTH | 1.593 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.062 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.750 INCHES NOMINAL | | FIRST DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.262 INCHES NOMINAL | | OVERALL HEIGHT | 0.969 INCHES NOMINAL | | OVERALL LENGTH | 2.656 INCHES NOMINAL | | OVERALL WIDTH | 2.218 INCHES NOMINAL | | MATERIAL THICKNESS | 0.050 INCHES NOMINAL | | MATERIAL | RUBBER BODY | | MOUNTING DEVICE QUANTITY | 4 | | MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL | | MOUNTING METHOD | SCREW | | SECOND DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.297 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-B-5423/14 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | THRU-HOLE | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|