5925-00-220-3530, CIRCUIT BREAKER

5961-00-220-3529 SEMICONDUCTOR DEVICE,DIODE

National Stock Number:
5925-00-220-3530

Federal Supply Class:
5925

National Item Identification Number:
002203530

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

APL53-518-1	81541	SENSATA TECHNOLOGIES MARYLAND, INC
SM-C-633334	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

ACTUATOR FUNCTION	TRIP W/SEPARATE RESET
ACTUATOR POSITION DESIGNATION	BETWEEN POLE TWO AND THREE
BODY LENGTH	2.500 INCHES NOMINAL
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	1.530 INCHES MAXIMUM
BOSS HEIGHT	0.140 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.952 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.062 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.665 INCHES NOMINAL
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE AND TWO LINKED
FREQUENCY IN HERTZ	60.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	RELAY TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE AND NONTRIP FREE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	230.0 AC ALL LOCATIONS
MANUAL ACTUATOR TYPE AND QUANTITY	2 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	50.0 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	200.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	10 THREADED STUD(S)
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.658 INCHES NOMINAL
NOMINAL THREAD SIZE	0.125 INCHES
POLE QUANTITY	2
RESET METHOD	MANUAL
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.200 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	INSTANTANEOUS AND TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	7 THREADED STUD
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial