| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| BASE THICKNESS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| BODY STYLE | CLIP CONNECTED TYPE |
| COATING METHOD | PLATED CONTACT |
| CURRENT CARRYING RATING IN AMPS | 20.0 |
| FUSE ACCOMMODATION QUANTITY | 2 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 2 POLE, MAINLINE, FUSED |
| OVERALL HEIGHT | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| OVERALL LENGTH | 1.600 INCHES MINIMUM AND 1.640 INCHES MAXIMUM |
| OVERALL WIDTH | 1.100 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE MDG MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE MME MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE MSG MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE TERMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE CONTACT |
| MATERIAL | COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 CONTACT |
| MATERIAL | COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 TERMINAL |
| MATERIAL | PLASTIC DIALLYL PHTHALATE AND SILICA AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS AND PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER BODY |
| MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL |
| MOUNTING HOLE STYLE | ONE HOLE MOUNTING |
| MOUNTING HOLE QUANTITY | 1 |
| VOLTAGE IN VOLTS | 250.0 |
| SURFACE TREATMENT | COPPER AND TIN AND ZINC CONTACT |
| SURFACE TREATMENT | SOLDER DIP AND TIN TERMINAL |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-F-21346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |