| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| BODY STYLE | REAR PANEL MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 0.875 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | 0.437 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.750 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.875 INCHES NOMINAL |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +23.0 TO 33.0 |
| INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| KEYWAY WIDTH | 0.105 INCHES NOMINAL |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.813 INCHES NOMINAL |
| OVERALL HEIGHT | 1.200 INCHES MINIMUM AND 1.205 INCHES MAXIMUM |
| OVERALL LENGTH | 3.875 INCHES NOMINAL |
| OVERALL WIDTH | 1.070 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY |
| MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES AND KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER |
| PRECIOUS MATERIAL | SILVER |
| RESISTOR RATING | 330.0 OHMS |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/19 GOVERNMENT SPECIFICATION |
| VOLTAGE IN VOLTS | 28.0 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |