| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| BODY STYLE | REAR PANEL MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +90.0 TO 250.0 |
| INTERRUPTION INDICATOR METHOD | NEON LAMP |
| KEYWAY WIDTH | 0.200 INCHES MINIMUM |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | COPPER ALLOY TERMINAL |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| MOUNTING HOLE DIAMETER | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES AND KEYWAY |
| OVERALL HEIGHT | 1.200 INCHES MINIMUM AND 1.205 INCHES MAXIMUM |
| OVERALL LENGTH | 3.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM |
| OVERALL WIDTH | 1.068 INCHES MINIMUM AND 1.072 INCHES MAXIMUM |
| RESISTOR RATING | 120.0 KILOHMS |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/2 GOVERNMENT SPECIFICATION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 250.0 |