6150-01-473-2454 CABLE ASSEMBLY,SPECIAL PURPOSE,E Index 6150-01-473-2456 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5915-01-473-2455

Federal Supply Class:
5915

National Item Identification Number:
014732455

Description:
FILTER,RADIO FREQUENCY INTERFERE

Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.


Manufacturer Information:
1224373-20256232LOCKHEED MARTIN CORPORATION
M193259901MTK ELECTRONICS INC
RF15009-213619EMS DEVELOPMENT CORPORATION


Techincal Specification:
BODY LENGTH2.750 INCHES MAXIMUM
BODY WIDTH2.700 INCHES MINIMUM AND 2.800 INCHES MAXIMUM
FUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR, PLUG INPUT AND 1 CONNECTOR, RECEPTACLE OUTPUT LOCATION NOT OTHERWISE SPECIFIED
INCLOSURE TYPEENCASED
INPUT IMPEDANCE PER FUNCTION W/LOAD0.05 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
OPERATING CURRENT RATING PER FUNCTION IN AMPS0.5 BLANK LOCATION NOT OTHERWISE SPECIFIED
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION20.0 VOLTS DC BLANK LOCATION NOT OTHERWISE SPECIFIED
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT0.05 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
OVERALL HEIGHT1.200 INCHES MINIMUM AND 1.300 INCHES MAXIMUM
OVERALL LENGTH4.200 INCHES MINIMUM AND 4.300 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S) LOCATION NOT OTHERWISE SPECIFIED
SPECIAL FEATURES37 PIN DAU FILTER;TWISTED PAIR-STRAIGHT THROUGH
RELATIONSHIP TO SIMILAR EQUIPMENTSIMLIER TO FILTER RADIO FREQUENCY INTER. P/NM1932;RF15009-2
SPECIFICATION/STANDARD DATA56232-1224373-202 MANUFACTURERS SPECIFICATION CONTROL
UNTHREADED MOUNTING HOLE DIAMETER0.120 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
STYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
TEST DATA DOCUMENT56232-1224373 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us