5915-01-133-5910 FILTER,BAND PASS Index 5930-01-133-5912 SWITCH,THERMOSTATIC

National Stock Number:
5915-01-133-5911

Federal Supply Class:
5915

National Item Identification Number:
011335911

Description:
FILTER,RADIO FREQUENCY INTERFERE

Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.


Manufacturer Information:
10135206A486GNIMIKKEISTOKESKUS NCB FINLAND
8219-0075-0117472EATON AEROSPACE LLC
F-131420AM43LCR ELECTRONICS, INC
F129220AM43LCR ELECTRONICS, INC
FC259456528FIL-COIL INTERNATIONAL LLC
M179259901MTK ELECTRONICS INC


Techincal Specification:
BODY HEIGHT1.562 INCHES MAXIMUM
BODY LENGTH3.350 INCHES MAXIMUM
BODY MATERIALMETAL
BODY SURFACE TREATMENTTIN
BODY WIDTH2.350 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.958 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.958 INCHES MAXIMUM
FUNCTIONAL TERMINAL TYPE AND QUANTITY8 WIRE HOOK OUTPUT SECOND FUNCTION
FUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR, RECEPTACLE INPUT-GROUND FIRST FUNCTION
INCLOSURE TYPEENCASED
LOAD IMPEDANCE PER FUNCTION50.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE(S) LOCATION NOT OTHERWISE SPECIFIED
OPERATING CURRENT RATING PER FUNCTION IN AMPS23.0 BLANK LOCATION NOT OTHERWISE SPECIFIED
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION28.0 VOLTS DC BLANK LOCATION NOT OTHERWISE SPECIFIED
SOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
UNTHREADED MOUNTING HOLE DIAMETER0.174 INCHES NOMINAL
STYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us