|
|
|
National Stock Number:
5915-00-898-9625
Federal Supply Class:
5915
National Item Identification Number:
008989625
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 195676-000 | 81413 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 63A5A81-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | SP202 | 13619 | EMS DEVELOPMENT CORPORATION | | JN17-3383A1 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 691157-1 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | SP202 | 81831 | FILTRON CO INC DIV OF RFI CORP |
|
Techincal Specification:
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT FIRST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG OUTPUT SECOND FUNCTION | | INCLOSURE TYPE | HERMETICALLY SEALED | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED STUD(S) LOCATION NOT OTHERWISE SPECIFIED | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | NOMINAL THREAD SIZE | 0.138 INCHES | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 3.0 BLANK LOCATION NOT OTHERWISE SPECIFIED | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 130.0 VOLTS AC BLANK AND 400.0 VOLTS DC BLANK LOCATION NOT OTHERWISE SPECIFIED | | TEST DATA DOCUMENT | 81413-195676-000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|