| AVERAGE LIFE RATING IN HOURS | 10000.0 |
| BODY HEIGHT | 3.000 INCHES NOMINAL |
| BODY MATERIAL | METAL |
| BODY LENGTH | 4.500 INCHES NOMINAL |
| BODY WIDTH | 1.250 INCHES NOMINAL |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 20.0 MINIMUM BLANK AND 6.0 MAXIMUM BLANK FIRST FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.562 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 3.750 INCHES NOMINAL |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN INPUT FIRST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN OUTPUT SECOND FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 PIN GROUND THIRD FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 61.00 KILOHERTZ BLANK AND 63.00 KILOHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 600.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 8.0 BLANK LOCATION NOT OTHERWISE SPECIFIED |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 2.0 KILOHMS BLANK LOCATION NOT OTHERWISE SPECIFIED |
| OVERALL HEIGHT | 3.360 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE(S) LOCATION NOT OTHERWISE SPECIFIED |
| OPERATING TEMP RANGE | -55.0 TO 75.0 CELSIUS |
| REFERENCE FREQUENCY PER FUNCTION | 62.0 KILOHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED |
| SPECIAL FEATURES | CARRIER FREQUENCY 64.0 KHZ LOWER SIDEBAND; UNPACKAGED UNIT WEIGHT: LB1.300 |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.160 INCHES NOMINAL |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 60.00 KILOHERTZ BLANK AND 61.00 KILOHERTZ BLANK AND 63.00 KILOHERTZ BLANK AND 64.00 KILOHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| TEST DATA DOCUMENT | 00724-08-00242-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |