|
|
|
National Stock Number:
5915-00-466-1377
Federal Supply Class:
5915
National Item Identification Number:
004661377
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 337-466-9001 | 70210 | HONEYWELL INTERNATIONAL INC. | | GF8502-1 | 07294 | GENISCO FILTER CORP | | GF8502-1 | 13050 | SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON | | NF20866 | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. |
|
Techincal Specification:
| BODY LENGTH | 2.000 INCHES NOMINAL | | BODY SURFACE TREATMENT | TIN | | BODY WIDTH | 1.750 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.495 INCHES MINIMUM AND 1.515 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.250 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG INPUT FIRST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG OUTPUT SECOND FUNCTION | | INCLOSURE TYPE | ENCASED | | OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS | | OVERALL HEIGHT | 1.000 INCHES NOMINAL | | OVERALL LENGTH | 2.000 INCHES NOMINAL | | OVERALL WIDTH | 2.130 INCHES MAXIMUM | | MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 400.0 VOLTS AT SEA LEVEL | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) LOCATION NOT OTHERWISE SPECIFIED | | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK LOCATION NOT OTHERWISE SPECIFIED | | SPECIAL FEATURES | EIGHT FUNCTIONS; TERMINALS ON ONE SURFACE | | UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES NOMINAL | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 70210-337-466-9001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|