| ELECTRICAL POLARIZATION | POLARIZED |
| ANODE TYPE | PLAIN FOIL |
| BODY DIAMETER | 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| BODY LENGTH | 1.316 INCHES MINIMUM AND 1.416 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE END |
| CAPACITANCE VALUE PER SECTION | 100.000 MICROFARADS SINGLE SECTION |
| CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| CASE INSULATION MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 150.0 MICROAMPERES |
| DC LEAKAGE AT REFERENCE TEMP | 25.000 MICROAMPERES |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 1.10 |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 0.22 |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 75.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| RELIABILITY INDICATOR | ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39018/8 GOVERNMENT SPECIFICATION |
| TERMINAL DIAMETER | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.313 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE RANGE PER SECTION | -10.00 TO 100.00 PERCENT SINGLE SECTION |