5910-01-159-0779 CAPACITOR,FIXED,PLASTIC DIELECTR Index 5910-01-159-0781 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5910-01-159-0780

Federal Supply Class:
5910

National Item Identification Number:
011590780

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.


Manufacturer Information:
160-168501378SPELLMAN HIGH-VOLTAGE ELECTRONICS CORPORATION
190-168513619EMS DEVELOPMENT CORPORATION
38513F13058SORA POWER INC.
57159513058SORA POWER INC.
G210969-13B150RAYTHEON COMPANY
G210969-149956RAYTHEON COMPANY
G210969-154X10RAYTHEON COMPANY


Techincal Specification:
BODY HEIGHT2.225 INCHES MAXIMUM
BODY LENGTH3.250 INCHES MINIMUM AND 3.374 INCHES MAXIMUM
BODY STYLEW/MTG TABS/FLANGES TERMINALS ON OPPOSITE SURFACES
BODY WIDTH2.500 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION1.900 MICROFARADS ALL SECTIONS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.025
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH3.625 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.000 INCHES NOMINAL
FEATURES PROVIDEDHERMETICALLY SEALED CASE
INSULATION RESISTANCE AT REFERENCE TEMP100000.0 MEGOHMS
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED MOUNTING HOLES
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION300.0 AC-RMS ALL SECTIONS AND 200.0 DC ALL SECTIONS
NONDERATED OPERATING TEMP0.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
RELIABILITY INDICATORNOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
SECTION QUANTITY2
TERMINAL DIAMETER0.190 INCHES NOMINAL
TERMINAL SURFACE TREATMENTSOLDER
TERMINAL TYPE AND QUANTITY4 THREADED STUD
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT ALL SECTIONS
UNTHREADED MOUNTING HOLE DIAMETER0.170 INCHES MINIMUM AND 0.176 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us