|
|
|
National Stock Number:
5910-01-101-2272
Federal Supply Class:
5910
National Item Identification Number:
011012272
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 0160-3238 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 0160-3238 | 28480 | HEWLETT-PACKARD COMPANY | | 2713-237-00 | 06434 | LORAIN ELECTRONICS CORP | | 32M1503J2 | 12673 | WESCO ELECTRICAL CO INC | | 32M1503K2 | 12673 | WESCO ELECTRICAL CO INC | | 192P15452 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 663F15452W | 84411 | AMERICAN SHIZUKI CORP | | 663F15491W2 | 84411 | AMERICAN SHIZUKI CORP |
|
Techincal Specification:
| BODY DIAMETER | 0.359 INCHES NOMINAL | | BODY LENGTH | 0.938 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.150 MICROFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER) | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.7500 | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|