5910-01-096-7962, CAPACITOR,FIXED,PLASTIC DIELECTR

5910-01-096-7960 CAPACITOR,FIXED,MICA DIELECTRIC

5910-01-096-7963 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5910-01-096-7962

Federal Supply Class:
5910

National Item Identification Number:
010967962

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

160-1480	01378	SPELLMAN HIGH-VOLTAGE ELECTRONICS CORPORATION
976149-1	3B150	RAYTHEON COMPANY
976149-1	49956	RAYTHEON COMPANY
976149-1	54X10	RAYTHEON COMPANY

Techincal Specification:

BODY HEIGHT	3.880 INCHES MINIMUM AND 4.120 INCHES MAXIMUM
BODY LENGTH	2.690 INCHES MINIMUM AND 3.000 INCHES MAXIMUM
BODY STYLE	W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
BODY WIDTH	2.000 INCHES MINIMUM AND 2.550 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION	12.000 MICROFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.812 INCHES NOMINAL
DIELECTRIC MATERIAL	PAPER AND PLASTIC
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.5000
INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL
INSULATION RESISTANCE AT REFERENCE TEMP	1000.0 MEGOHMS
MATERIAL	PLASTIC CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	240.0 AC-RMS SINGLE SECTION
NONDERATED OPERATING TEMP	0.0 CELSIUS MINIMUM AND 65.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL HEIGHT FROM BODY	0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL TYPE AND QUANTITY	2 STANDOFF, SOLDER LUG
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION

Click here to Register for Free 30-day Trial